| Plastics |
Tensile properties
|
ISO 527-2 |
|
Flexural properties
|
ISO 178 |
|
Charpy impact strength
|
ISO 179-1 |
|
Creep modulus in tension at +23 °C: E(1min), E(1h), E(100h)
|
ISO 899-1 |
|
Hardness: ball indentation
|
ISO 2039-1 |
|
Shore D
|
ISO 868 |
|
Coefficient of linear thermal expansion a und Tg (TMA)
|
ISO 11359-2 |
|
Flexural vibration - Resonance-curve method (DMA)
|
ISO 6721-3 |
|
Thermal analysis; glass transition temperature, melting and crystallization behaviour, OIT (DSC)
|
ISO 11357-2 |
|
Oxidation induction temperature
|
ISO 11357-6 |
|
Thermal analysis (DSC): melting & crystallization behaviour
|
ISO 11357-3 |
|
Thermal analysis; content of carbon black (TGA)
|
ISO 11358-2 |
|
Thermal analysis; coefficient of linear thermal expansion and glass transition temperature (TMA)
|
ISO 11359-2 |
|
Vicat softening temperature
|
ISO 306 |
|
Temperature of deflection under load
|
ISO 75-2 |
|
Melt mass-flow rate (MFR)
|
ISO 1133 |
|
Density of plastics
|
ISO 1183-1 |
|
Determination of ash (0,1 % to 10 %) - procedure A
|
ISO 3451-1 |
|
Viscosity of PET in dilute solution
|
ISO 1628-5 |
| Coatintings, Paints, varnishes |
Colorimetry
|
DIN 6176 |
|
Specular gloss
|
ISO 2813 |
|
Light microscopy analysis of layer structures
|
- |
|
Semi-Quantitative analysis of elements by means of REM-EDX
|
ISO 22309 |
|
Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
|
ISO 4892-2 Verfahren A |
|
Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
|
ISO 4892-3 Zyklus 1 |
|
Heat aging test on thermoplastic molded compounds, without external mechanical stress
|
DIN 53497 |
|
Chemical resistance
|
- |
|
Measurement of coating thickness -- Amplitude-sensitive eddy-current method
|
EN ISO 2360 |
|
Measurement of coating thickness -- Magnetic method
|
EN ISO 2178 |
|
Pull-off test for adhesion
|
EN ISO 4624 |
|
Cross cut test
|
EN ISO 2409 |
|
Assessment of degree of blistering
|
EN ISO 4628-2 |
| Rubber |
Hardness: Shore A
|
ISO 48-4 |
|
Hardness: IRHD - method N - normal test
|
ISO 48-5 |
|
Hardness: IRHD - method M - microtest
|
ISO 48-2 |
|
Compression set
|
ISO 815-1 |
|
Density
|
ISO 2781 |
|
Tensile stress-strain properties
|
ISO 37 |
|
Tear strength
|
ISO 34-1 |
|
Abrasion resistance using Taber abrader
|
ISO 5470-1 |
|
Abrasion resistance using a rotating cylindrical drum device
|
ISO 4649 |
| Rubber, unvulcanized |
Mooney viscosity
|
ISO 289 |
| Plastic films |
Tensile properties of plastic films
|
ISO 527-3 |
|
Tear test (trouser tear method)
|
ISO 6383-1 |
|
T-peel test on flexible multilayer plastic films
|
ISO 11339 |
|
Seal seam strength
|
EN 868-5 |
|
Determination of the coefficients of friction
|
ISO 8295 |
|
Film thickness by mechanical scanning
|
ISO 4593 |
|
Overall migration
|
EN 1186 |
| Plastic sheeting, flexible |
Flexible sheets for waterproofing - Tensile properties
|
EN 12311-2 |
|
Resistance to tearing
|
EN 12310-2 |
|
Resistance to tearing (nail shank)
|
EN 12310-1 |
|
Resistance to impact
|
EN 12691 |
|
Peel resistance of joints
|
EN 12316-2 |
|
Static puncture test (CBR-test) for PEHD-sealing sheeting
|
EN ISO 12236 |
|
Determination of thickness and mass per unit area
|
EN 1849-2 |
| Plastic pipes |
Tensile properties
|
ISO 6259-3 |
|
Thermoplastic pipes - ring stiffness
|
ISO 9969 |
|
Thermoplastics pipes - longitudinal reversion
|
ISO 2505 |
|
Thermoplastics pipes - creep ratio
|
ISO 9967 |
|
Creep modulus in tension on samples taken from pipes
|
ISO 899-1 |
|
Determination of dimensions
|
ISO3126 |
|
Thermoplastic pipes: Resistance to external blows - staircase method
|
ISO 11173 |
|
Thermoplastic pipes: Resistance to external blows - round-the-clock method
|
ISO 3127 |
|
Internal pressure test - time to rupture
|
ISO 1167-2 |
|
Degree of pigment or carbon black Dispersion
|
ISO 18553 |
|
Determination of chlorine content of PVC-pipe
|
ISO 1158 |
| Geotextiles |
Thickness under specified pressures
|
ISO 9863-1 |
|
Characteristic opening size
|
ISO 12956 |
|
Wide-width tensile test
|
ISO 10319 |
|
Static puncture test (CBR-test)
|
ISO 12236 |
|
Water permeation normal to plane
|
ISO 11058 |
|
Dynamic perforation test (cone drop test)
|
ISO 13433 |
|
Pyramid puncture resistance
|
EN 14574 |
|
Mass per unit area
|
ISO 9864 |
|
Tensile strength of nonwovens
|
EN ISO 9073-3 |
|
Weathering with following tensile test
|
EN 12224 |
|
Determination of burst strength
|
EN 14151 |
| Plastics, rigid cellular |
Compression behaviour
|
EN ISO 29469 |
|
Dynamic stiffness
|
ISO 9052-1 |
|
Dimensional stability under specified temp. and humidit conditions
|
EN 1604 |
|
Tensile strength parallel to faces
|
EN 1607 |
|
Short term water absorption by partial immersion
|
EN ISO 29767 |
|
Determination of water vapour transmission properties
|
EN 12086 |
| Sports surfaces |
Determination of vertical ball behaviour
|
EN 12235 |
|
Determination of vertical deformation
|
EN 14809 |
|
Determination of shock absorption
|
EN 14808 |
|
Slip resistance
|
EN 13036-4 |
|
Tensile properties of synthetic sports surfaces
|
EN 12230 |
|
Thickness
|
EN 1969 |
|
Critical fall height
|
EN 1177 |
|
AAA method
|
CEN/TS 16717 |
|
Determination of rotational resistance
|
EN 15301-1 |
|
Rotational friction
|
EN 14903 |
|
Angled ball behaviour, Tennis
|
EN 13865 |
|
Determination of particle size – sieving method
|
EN 933-1 |
